Heartbeat bears: how they work and how to make one

A heartbeat bear is a stuffed animal with a small recorder inside. Press its paw or its tummy and it plays a few seconds of sound, most often a baby’s heartbeat recorded during pregnancy. They are popular gifts for grandparents, for a new sibling, and for parents to keep.

This guide covers how they work, where the recording comes from, how to make one yourself, and how to keep the sound long after the batteries run out.

How a heartbeat bear works

Inside the toy, usually in a pocket closed with a zipper or a hook-and-loop strip, sits a sound module: a button, a small speaker, a microphone, and a memory chip, powered by button batteries. You record by pressing a button on the module and holding it near the sound. After that, squeezing the bear plays the recording back.

Most modules hold a short clip. Sellers commonly quote about 20 seconds, and some run to 30. Many can be recorded over if the first try doesn’t come out well.

Where the recording comes from

At an appointment

This is the usual way. Take the module with you to a checkup or a scan you already have booked, and ask whether you may record a few seconds when the heartbeat is played aloud. Sellers say many clinics are used to the request. Ask first, because some have their own rules about recording.

From your phone

If you recorded audio or video on your phone at an appointment, you can play it back next to the module later. Use the phone’s speaker at a comfortable volume in a quiet room, and hold the module’s microphone close to it.

From a recording you made yourself

Late in pregnancy, some parents record a heartbeat keepsake at home with a phone app. Our app, Flutter Baby Heartbeat Monitor, uses your phone’s microphone to listen for the heartbeat and saves a recording you can share as audio. Test how it sounds through the bear’s small speaker before you close the bear up.

Flutter saved recordings screen showing a recording named First Heartbeat with its waveform and Share Audio and Share Video buttons
A saved recording in Flutter, ready to share as audio or video.
Download on the App StoreGet it on Google Play

What to skip

Some sellers suggest buying or renting a handheld doppler so you can record at home. We’d skip that. The NHS tells parents not to use home dopplers to check on a baby, and the FDA says those devices should be used only by trained health care providers. You don’t need an extra scan for a keepsake, either. A few seconds at an appointment you already have is enough.

How to make your own

  1. Choose the toy. Any soft toy with a pocket works. If yours has none, a small slit in a back seam, closed again with a few stitches, does the job.
  2. Get a recordable module. They are sold on their own for stuffed animals. Check the recording length and whether it can be recorded over.
  3. Record. Hold the module close to the sound and keep the room quiet. Record more than once and keep the best take.
  4. Test it. Play it back a few times before it goes inside.
  5. Place it. Put the module where a squeeze will find it, with stuffing around it so it stays put.
  6. Label it. Tie on a tag with the date, the week of pregnancy, and who made it.

Keep it out of the cot

A recordable module has small parts and button batteries. Treat the bear as a keepsake for a shelf, not as a toy for a baby or a young child, and keep it out of the cot.

Keep the sound somewhere safer than the bear

The bear is the display. The recording is the keepsake, and a module is a poor place to store the only copy. Batteries run down. Chips wear out. Build-A-Bear Workshop, for one, says the sound chips in its stuffed animals have a maximum life of two years, depending on use.

  • Keep the original audio or video file, and back it up.
  • Write down where the file lives and put the note in your baby memory box.
  • If the bear goes into storage, take the batteries out first so they can’t leak.

Other things to do with the same recording

A recording that fits in a bear can also become sound wave art, the soundtrack to a time-lapse of bump photos, or the first thing you play at the baby shower.

Questions and answers

What is a heartbeat bear?

A stuffed animal with a small recordable sound module inside. Squeeze it and it plays a short recording, usually of a baby’s heartbeat from pregnancy.

How do I record my baby’s heartbeat for a bear?

The usual way is to take the recordable module to an appointment you already have and ask to record a few seconds when the heartbeat is played aloud. You can also play back a recording from your phone next to the module.

How long is the recording in a heartbeat bear?

Short. Most modules hold about 20 seconds, and some hold up to 30.

Can I add a heartbeat to a Build-A-Bear?

Build-A-Bear Workshop offers a Record Your Voice sound that goes inside its stuffed animals. Its site says a recording can be up to 30 seconds long. Ask in store whether you can record from your phone’s speaker.

Is a heartbeat bear safe for a baby?

Treat it as a keepsake, not a toy. The module has small parts and button batteries, so keep the bear on a shelf and out of the cot.

Should I buy a device to record the heartbeat at home?

No. Health services advise against using home listening devices to check on a baby, and you don’t need one for a keepsake. Ask to record a few seconds at an appointment you already have.

Keep reading

A recording of your own

Flutter Baby Heartbeat Monitor is free to download for iPhone, iPad, and Android. For bonding and creating memories and keepsakes — not a medical device. Learn more about Flutter.

Download on the App StoreGet it on Google Play

This article is about keeping memories and isn’t medical advice. For anything about your health or your baby’s, talk to your midwife or doctor. Build-A-Bear Workshop is a trademark of its respective owner. Polycene is not affiliated with it.